#HOW TO USE TELNET WITH NETWORK SSTORAGE INSTALL#
#HOW TO USE TELNET WITH NETWORK SSTORAGE SERIAL#
#HOW TO USE TELNET WITH NETWORK SSTORAGE PASSWORD#

By typing corresponding command, various configurations of switch, like switch stacking, MLAG and LACP, can be set.

#HOW TO USE TELNET WITH NETWORK SSTORAGE PASSWORD#

Type the username and password (admin/admin) in the login interface, then move on to the configuration menu as shown below. Type вЂњtelnet 192.168.1.1вЂќ command into the window that displays and then click вЂњOKвЂќ.ДЈ. Click вЂњStartвЂќ in the bottom left corner of the screen, then click вЂњRunвЂќ. Connect the management port of the switch to the RJ45 port of the PC with an Ethernet cable like Cat5e and Cat6 cables.Дў. This method is applicable to the remote management of the switch which has been configured with IP address (default 192.168.1.1) and user account with the administration authority.ДЎ. Telnet is a network management protocol, through which an administrator or another user can access someone elseвЂ™s computer remotely. Once things go abnormal or involve elevated permissions, the console port which boasts superuser privilege can help accomplish the operation. Users can also get access to the basic configuration of the switch through the management port, however, with general authority. Press the вЂњOpenвЂќ key and input the default username and password (admin/admin) on the interface popped up, to log in to the switch. For example, the baud speed of FS TAP switches are 9600.Д¤. Tips: different Ethernet switches may have different baud speed.

#HOW TO USE TELNET WITH NETWORK SSTORAGE SERIAL#

Power on the switch, then open the installed login software (the software Putty is used as an example here), select the serial login mode, and the port is determined by the device manager. If no built-in terminal emulation software is available, prepare the terminal emulation software like SecureCRT and the open source Putty.ДЈ. You can use the built-in Hyper Terminal of Windows 2000 on the PC.

#HOW TO USE TELNET WITH NETWORK SSTORAGE INSTALL#

Install terminal emulation software on the PC. Connect switch console port to the computer serial port with a combination of an RJ45 to RS232 converter cable (provided by the vendor) and an RS232 to USB converter cable (prepared by yourself).Дў. Here are the detailed steps of logging in to a network switch via the console port.ДЎ. In most cases, it is the very first step to configure your network switch. The console port is used to connect a computer directly to a Gigabit Ethernet switch and manage the switch since there is no display device for the switch.

To use telnet to connect to the computer running the telnet Server Service at on TCP port 44 and ro log the session activity in a local file called telnetlog.txt, type: telnet /f telnetlog.txt in to a Network Switch via the Console Port To use telnet to connect to the computer running the telnet Server Service at, type: telnet Specifies the hostname or IP address of the remote computer to connect to, and optionally the TCP port to use (default is TCP port 23). Supported terminal types are vt100, vt52, ansi, and vtnt. Specifies the user name to log on with on the remote computer. Specifies the file name used for client side logging. Specifies the escape character used to enter the telnet client prompt. Same as /l option, except that it uses the currently logged on user's name. Syntax telnet ] ДЄttempts automatic logon. For more information, see Installing telnet.

You must install the telnet client software before you can run this command.

How to use telnet with network sstorage